| Ethernet Errors | ||
|---|---|---|
| Error Message | Contents | Solution |
| 0 | Normal | |
| 200 | Failed in send request | Check cable connection and network table setting of the target station. |
| 201 | Send error | Check that the setting on the target station is consistent with the network table setting. |
| 202 | Internal port error | The communication unit is in the older version or is faulty. |
| 204 | TCP connection over | The number of connections reaches the maximum, and no more connection is possible. Check the communication lines. |
| 205 | TCP connection error | Connection cannot be established. Check the communication lines, or turn the power off and on. |
| 206 | TCP connection end error | TCP communication disconnection has failed. Check that the communication partner with the V7 series is present on the line. |
| 207 | TCP send error | TCP communication has failed. Check the communication lines. |
| 350 | Send buffer full | The line is busy. Consult the network administrator of your company. The communication unit is in the older version or is faulty. |
| 351 | IC receive buffer overflow | |
| 352 | Driver receive buffer overflow | |
| 801 | Receive processing error Link down error |
Check the HUB or the link confirmation LED on the communication unit. If the LED is not on, check cable connection and the port setting on the network table. |
| 802 | Transceiver error | Check the transceiver and cable connection. |
| 900 | No IP address at local port | Check that the IP address of the local port is set on the network table. Check if the same IP address is set on the network. |
| 901 | Duplicated IP address error | |
| 902 | Send socket ID error (error that may occur when V7i LAN port is used) | Turn the power off and back it on. If the problem persists, contact your local distributor. |
| 1000 | Ethernet I/F unit not mounted | Check whether the Ethernet I/F unit is mounted correctly, and then turn the power off and on. If the problem persists, contact your local distributor. |
| 1001 | Ethernet I/F unit not ready | |
| 1002 | Ethernet I/F unit DPRAM error | |
| 1003 | No response from Ethernet I/F unit | |
| 1004 | Ethernet receive buffer over | |
| 1005 | Ethernet send registration error | |
| 1006 | I/F unit unregistered interrupt | |
| 1100 to 1115 | Initialization error (communication unit) | |
| 1120 | Dual port access error | |
| 1200 | Undefined register | |
| 1201 | Send/receive buffer area over | |
| 1202 | MAC address error | |
| 1203 | Port error | Check whether the Ethernet I/F unit is mounted correctly, and then turn the power off and on. If the problem persists, contact your local distributor. |
| 1301 | Watch dog overflow | |
| 1302 | JAVA error LANC error | |